Using an old SmartDrive motor in a hydroelectric project to make free power - a waterwheel will drive the generator!
UPDATE: Planning the water wheel
Get link
Facebook
X
Pinterest
Email
Other Apps
Sunday, 27th of August
Sam and Stefan explored the area where the water wheel will go.
We are planning to make it out of plywood and PVC pipe which will be the center. We will then use our knowledge of electronics to make a 'dynamo', which will run electricity through wires to other uses such as a floodlight and chargers in their home. Sam's family currently uses a petrol generator which charges many of their 12V car/boat batteries to power their lights and other small appliances. We are also considering using a washing machine motor as our dynamo. The water wheel will have paddles to create resistance which turns the wheel fast. We are hoping to get up to 30 volts of electricity.
Area where wires could be dug underground - maybe power an LED floodlight
Wires could lead into caravan to charge devices, power lights, etc. as the generator is not always on
Difficult to charge devices when there is no power
An excellent blog Stefan and group, clear and easy to follow with good ideas and information. This is looking really great and is moving forward. Do not forget to link to sustainability issues.
UPDATE We have not done much the past few weeks because we have been busy with other things. Stefan said he has got nearly all parts we need for the project. I hope to get back to it soon.
Saturday and Sunday, 16th - 17th of September Stefan stayed over at Sam's house and they both had a very productive weekend. Summary: I won't talk about much this post as I have put together a fun video of our hydroelectric system. We cut and screwed together lots of wood for the water wheel and its stand/holder. We were also able to secure the SmartDrive in place with lots of tests and had a fun time in the creek with it. Some of it was tough, like trying to align the wheel perfectly, but we managed to get it working in the end. We tested our 300W inverter on a small lamp and it was great, we also managed to get the SmartDrive turning on full load in the creek which was really impressive, considering we haven't even built a proper flume to project the water more efficiently. Anyway, I hope you enjoy this video:
Friday and Saturday, 6th - 7th October Stefan stayed over at Sam's house and they both continued to work on their project. Past week or two: All ordered items have arrived including the charge controller, rectifiers and fuses. On Friday, Stefan and Sam began by cutting, trimming and digging their track down into the stream. It looks very nice now. Sam and his dad put together a flume. With the help of a sledgehammer to smash down rocks, they were able to secure the flume into the stream. It is a large wooden track that diverts water to the wheel. Later on in the evening, Sam and Stefan began rewiring the SmartDrive motor into 3 phase 4 x 3 coils in series. Some photos show their work. They finished rewiring on Saturday and roughly tested the setup. Despite their efforts, the results were very disappointing. The wheel was supposedly making just under 12 watts, (12 volts at 1 amp). They figured that the wheel was not spinning fast enough and 20 or so watts were being lost from...
this is cool
ReplyDeleteAn excellent blog Stefan and group, clear and easy to follow with good ideas and information. This is looking really great and is moving forward. Do not forget to link to sustainability issues.
ReplyDelete