What is our Sustainability project about?

Stefan, Damon and this guy called Sam, we will be completing our sustainability project on:

Build a water dam or hydroelectric waterwheel that collects electricity, which we will then use to power lights, charge devices and maybe even heat or filter water.

 We have to see the legal requirements for putting our water wheel in. We must allow a part of the stream to flow naturally.
We learnt about how induction heating works, the legal requirements and we thought of some ideas what we will do with the electricity.

 The lesson went well today, we now have a good idea of what we are doing in our project. We did not muck around much.




Comments

Post a Comment

Popular posts from this blog

UPDATE: Putting our Water Wheel together!

Image
Saturday and Sunday, 16th - 17th of September Stefan stayed over at Sam's house and they both had a very productive weekend. Summary: I won't talk about much this post as I have put together a fun video of our hydroelectric system.  We cut and screwed together lots of wood for the water wheel and its stand/holder. We were also able to secure the SmartDrive in place with lots of tests and had a fun time in the creek with it. Some of it was tough, like trying to align the wheel perfectly, but we managed to get it working in the end. We tested our 300W inverter on a small lamp and it was great, we also managed to get the SmartDrive turning on full load in the creek which was really impressive, considering we haven't even built a proper flume to project the water more efficiently. Anyway, I hope you enjoy this video:
Read more

UPDATE: Building the Water Wheel

Image
Sunday, 10th of September Stefan and Sam (with the help of his dad), began to design, cut, sand and loosely put together the water wheel.  The day: In the morning, Sam's dad helped us to cut the harder parts of the water wheel. After a quick search, Stefan found out the paddles should be small and on an angle to create small pockets for the water to catch in.  We first cut 2 big circles of plywood for the outside of the wheel and then 16 rectangular smaller pieces for the middle and paddles. Then came the refinements. Sam sanded most of the plywood, evening out the pieces so they were of the same size.  A week earlier, Stefan had made a prototype to hold the smart drive generator together out of MDF wood. This sucks in rain so Sam cut a new one and we re-did it out of ply. The results were great! After the hard day of work, we were able to sit down and relax. We were now able to assemble the wheel loosely to see how it would work. Looks awesome so far. At the t
Read more